Differences

This shows you the differences between two versions of the page.

--- tutorials:how_to:do_a_draft_angle_analysis [2025/11/30 15:16] – [Negative - on the mold] Ralf Gerke-Cantow
+++ tutorials:how_to:do_a_draft_angle_analysis [2025/11/30 15:17] (current) – Ralf Gerke-Cantow
@@ Line 11: / Line 11: @@
 Each parting plane can have three basic orientations: Horizontal, Vertical and Lateral - see the PARTING PLANE DIALOGUE on the right side of the screen.
 Select the orientation that best suits to the geometry by {{:glyphs:enumdecrement.png?30|}} or {{:glyphs:enumincrement.png?30|}} in “Orientation” of the PARTING PLANE DIALOGUE.
-<del>Select the Parting Plane to be the reference for the draft angle analysis and “Select Projected Plane” in the DEMOLDUNG MENU, which opens the “Select Entity” editor window.
-Select the plane and press the “Ok” in the “Select Entity” editor window.</del>
 Press {{:glyphs:demoldingplaneangle.png?30|}} in the DEMOLDING MENU and set “Absolute Angles” to “True”.
 Click onto the “Plane Angle Mode” in the DEMOLDING MENU for the draft angle analysis.